Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFamco Chimney Cleaning & Sweep in Denver: What to Know First
We provide independent Famco chimney cleaning and sweep services across Denver, from routine Level 1 annual sweeps to full NFPA 211 Level 2 camera inspections with documented photo records. Most Famco jobs book within a week, and every customer receives a written price before any work starts - no exceptions, no surprises. If you own a Famco chimney cap, damper, or venting component and need cleaning, inspection, or repair, call us at (720) 674-7312 for a free estimate. Corrine Halstead and our crew have worked Famco products in Denver homes since 2009, and we source replacement parts through our Haven buying network to keep pricing honest.
How Famco Products Fail - and How We Fix Them
- Famco 1074 and 1080 series chimney caps - The galvanized steel mesh on these caps traps moisture against the flue liner in Denver’s freeze-thaw cycles, accelerating spalling on clay tile liners below. We remove the cap, sweep the flue, and either refit the existing cap with a stainless upgrade or replace it with a Gelco equivalent that sheds water properly.
- Famco WD series wall dampers - The cast-aluminum throat plate warps after repeated thermal cycling, leaving a gap that draws room air up the flue even when “closed.” During sweep and inspection we measure the gap with a feeler gauge; if it’s over 3/16 inch, we document it on camera and quote a stainless damper replacement or a HeatShield smoke chamber seal if the surround is compromised.
- Famco RC chimney fans on low-slope roofs - The RC series motor housing collects creosote dust that hardens into Class III glazed creosote in Denver’s dry winters, causing motor strain and eventual failure. We disassemble the housing, rotary-clean the fan blades, and check amperage draw against OEM spec; if the motor’s pulling high, we quote a replacement before it seizes.
- Famco B-Vent collars on 80% furnaces in Capitol Hill and Baker - The snap-lock collar loosens as Denver’s clay soils shift foundations, creating a gap at the attic transition that leaks combustion gases. Our Level 2 inspection catches this with camera footage from the cleanout up; we reseat the collar, seal with OEM-rated foil tape, and document the repair under Haven Standard Clause 4.
- Famco stainless caps on Federal Boulevard Victorians - The 304-grade stainless holds up, but the set-screw attachment loosens under vibration from RTD buses and light rail. We find caps tilted or missing after wind events. We sweep, inspect liner condition, and reinstall with through-bolt hardware and a bead of high-temp silicone - no more lost caps.
Our Famco Chimney Cleaning & Sweep Process
- 1
Call and schedule. A live person answers, checks availability, and notes your Famco model if you know it. We don’t use web forms or voicemail.
- 2
Arrival and setup. Your assigned tech texts when en route, arrives uniformed with license visible, lays drop cloths, and reviews the written price and scope with you before touching anything - Haven Standard Clause 1.
- 3
Camera-scan inspection. We run a chimney camera from the firebox or cleanout to the cap, recording liner condition, creosote class, and any Famco-specific wear. The camera doesn’t guess. Neither do we.
- 4
Cleaning and repair. Rotary sweeping for Class I and II creosote; mechanical removal for Class III glaze. If Famco parts need replacement, we quote OEM or quality aftermarket (DuraFlex, Gelco, Olympia Chimney) with the price in writing before proceeding.
- 5
Testing and documentation. We pressure-test or smoke-test as appropriate, then deliver your photo record, written scope, and warranty documentation - Clause 4 of the Haven Standard, same as every job since 2009.
- 6
Cleanup and follow-up. HEPA vacuum, debris removal, and a 365-Day Done Right Promise stamped on your invoice. If it’s not right, we make it right.
Before
AfterWhat Famco Chimney Cleaning & Sweep Costs in Denver
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Level 1 sweep + Famco cap inspection | $189 - $259 | Roof pitch, cap accessibility, creosote class |
| Level 2 camera inspection (Famco venting) | $289 - $389 | Number of flues, liner material, documentation needed for insurance |
| Class III creosote removal (Famco RC fan housing) | $349 - $499 | Extent of glaze, disassembly required, motor testing |
| Famco damper replacement or rebuild | $425 - $675 | Smoke chamber access, surround condition, stainless vs. cast upgrade |
| Famco cap replacement (stainless upgrade) | $275 - $450 | Flue size, mesh gauge, through-bolt vs. set-screw mounting |
Every estimate is free, every price is written before work starts, and we offer a Free Second Opinion on any competitor’s written quote. Call (720) 674-7312 for your exact number.
Why Denver Homeowners Call Level Two Chimney Denver for Famco Work
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a significant share of Denver’s Famco inventory has passed through our hands - from the 1074 caps on Park Hill bungalows to RC fans in LoDo conversions. Our techs know the difference between a Famco OEM collar and a Copperfield equivalent that fits better after foundation shift. Because we buy DuraFlex, HeatShield, Gelco, and Olympia Chimney materials through the Haven network, we don’t mark up parts to recover a bad buying decision. Background-checked, uniformed crews. License on the page. Live phone, 24/7. And every job walks out with photos, a written warranty, and the 365-Day Done Right Promise.
FAQs
No - routine cleaning by a qualified professional preserves warranty coverage, but using non-OEM replacement parts without documentation can complicate a claim. We note all part sources on your written invoice and photo record so you have proof of proper maintenance if Famco or your home insurer asks. Call (720) 674-7312 if you need documentation for a warranty filing.
Galvanized Famco caps average 7-12 years in Denver before significant rust; stainless caps last 15-25 years but need fastener checks every 2-3 years. WD series dampers show warping at 8-14 years depending on burn habits. We flag expected remaining life during every inspection so you can budget, not panic. Call for a free condition check.
Repair makes sense if the throat plate is straight and the frame is square; replacement is the better value if warping exceeds 3/16 inch or the smoke chamber shows heat damage. We show you the camera footage, measure the gap, and quote both options in writing before you decide. No default to the more expensive fix.
We stock common Famco wear items and source same-week through our Haven network for less common sizes. If we find a cracked WD damper or seized RC fan motor during your sweep, we don’t leave you venting into the house - we quote the repair, schedule the return, and can often complete within 3-5 business days. Call (720) 674-7312 to check current stock on your model.
Annual sweeping is the NFPA 211 standard for wood-burning systems; gas and oil systems with Famco B-Vent typically need inspection every 1-2 years depending on usage. Denver’s altitude increases draft and can accelerate creosote buildup in marginal burns. We check your burn habits and fuel type during the first visit, then recommend a schedule that matches reality, not a calendar default. Free estimates: (720) 674-7312.
Written by Corrine Halstead, Owner, Level Two Chimney Denver at Level Two Chimney Denver, serving Denver and nearby areas.