Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cleaning & Sweep Across Centennial
A professional chimney cleaning and sweep in Centennial typically costs between $189 and $349, with most Level 2 camera inspections falling in the $279-$349 range. We serve Centennial from our Denver coordination office, and crews are routinely in Willow Creek, Piney Creek, and Smoky Hill within the same booking window we use for the broader metro. If your home was built between 1975 and 1998, there’s a strong chance it has a factory-built zero-clearance fireplace that’s now 30-50 years old, well past its rated service life. Call (720) 674-7312 for a written estimate before any work starts.
Why Level Two Chimney Denver Is Centennial’s Preferred Chimney Cleaning & Sweep Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in Centennial’s master-planned subdivisions. The concentration of aging prefab fireplaces here, built during the tract-home boom from the mid-1970s through the mid-1990s, means our technicians know the specific failure modes of HeatShield-compatible panels, DuraFlex liner systems, and the damper assemblies common to units from that era.
Our Chimney Cleaning & Sweep team arrives with background-checked, uniformed techs, a license number on every page, and a text when your technician is en route. Calls are answered by a live person, 24 hours a day, 7 days a week. Every job includes a written price before work begins, a documented photo record on completion, and the 365-Day Done Right Promise. We don’t do “call for a quote” - Haven Standard Clause 1 requires the price in writing before anyone starts.
Centennial homeowners tend to research before they call. We encourage it. Bring us any competitor’s written estimate for a Free Second Opinion.
Our Chimney Cleaning & Sweep Services in Centennial
Level 2 Inspection
This is our default for every Centennial home with a factory-built fireplace, which is most of them. NFPA 211 Level 2 means a camera down the flue, inspection of the smoke chamber, and documentation of the firebox panels, damper, and chimney cap. In Centennial’s 1970s-1990s subdivisions like Foxridge and Willow Creek, we find warped dampers and spalling refractory panels on roughly half the original units we inspect. The camera doesn’t lie, and neither do we - you’ll see what we see. Clause 4 of the Haven Standard requires that photo record on every job, and we’ve done it since 2009.
Level 1 Inspection
A Level 1 is a visual inspection without camera deployment, appropriate for newer systems with a recent clean history. In Centennial, we rarely recommend starting here. The age profile of local housing stock means most fireplaces have never had a documented internal inspection. If your home is in Piney Creek or Smoky Hill and was built before 1995, we’ll likely recommend Level 2. We’ll tell you why in plain terms, and the written price comes before we start.
Creosote Removal
Centennial’s location on the Front Range creates a specific creosote problem. Colorado CDPHE wood-burning curtailment designates Action Days across the metro area, including Centennial, when wood burning is prohibited. Many homeowners idle their fireplaces through stretches of cold weather, then burn hard on allowed days, often at low smoldering temperatures for ambiance rather than heat. This stop-start pattern deposits Stage 2 and Stage 3 glazed creosote, especially in the undersized prefab flues common here. Standard brushes won’t touch third-degree creosote. We use mechanical removal and, when necessary, chemical treatment, then verify with the camera. You’ll get photos of before and after.
Soot Removal & Fireplace Cleaning
Soot accumulation in factory-built units isn’t just a cleanliness issue. In Centennial’s dry climate, fine particulate embeds in refractory panel cracks and accelerates deterioration. Our fireplace cleaning includes the firebox, smoke chamber, and accessible flue sections, with debris contained and removed. We check for panel compatibility with original manufacturer specs - Famco, Gelco, and Olympia Chimney parts are stocked through our buying network to keep turnaround honest.
Annual Sweep
For Centennial homes with active wood-burning use, NFPA 211 recommends annual inspection and cleaning. Given the age of most local prefab systems, we treat “annual” as a floor, not a ceiling. If you’re burning on allowed days through the curtailment season, we may recommend more frequent checks based on what the camera shows.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Centennial
We source materials through Haven’s buying network from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. For Centennial’s concentration of 1970s-1990s factory-built fireplaces, this matters because manufacturer-specific parts are often required for safe panel replacement and liner repair. We don’t substitute generic components and hope they fit. If your unit needs a Famco-compatible refractory panel or a DuraFlex liner section, we stock or source it directly, and the written scope specifies exactly what you’ll get. No “equivalent or substitute” language. What we quote is what we install.
Common Chimney Cleaning & Sweep Problems We See in Centennial Homes
- Factory-built fireplaces past their rated service life. The zero-clearance units installed in Willow Creek, Foxridge, and Piney Creek were rated for 20-30 years. Most are now 30-50 years old. Firebox refractory panels crack and spall; damper assemblies warp. The unit still lights, so homeowners assume it’s fine. It’s not.
- Chinook-driven freeze-thaw damage to prefab chimney caps and flashing. Centennial sits at roughly 5,900-6,000 feet in Chinook wind territory. Sudden downslope warming creates rapid freeze-thaw pressure reversals that crack caps and loosen flashing. Water enters the chase, rusts the metal flue, and accelerates system failure.
- Third-degree glazed creosote from stop-start burning patterns. CDPHE Action Day idling followed by low-temperature smoldering burns deposits hard, glazed creosote that standard sweeping won’t remove. This is especially common in Centennial’s undersized prefab flues.
- Undersized or deteriorating flue liners creating draft and safety issues. Original factory-built liners in 1980s units weren’t designed for modern insert retrofits or decades of thermal cycling. We camera-scan to verify liner integrity and sizing against current use.
Pricing for Chimney Cleaning & Sweep in Centennial, CO
Here’s what we charge in Centennial’s market, with every price delivered in writing before work starts:
| Service | Price Range in Centennial |
|---|---|
| Annual Sweep with Level 1 Inspection | $189 - $249 |
| Level 2 Camera Inspection & Sweep | $279 - $349 |
| Stage 2 Creosote Removal (mechanical) | $329 - $449 |
| Stage 3 Glazed Creosote Removal (chemical + mechanical) | $489 - $679 |
| Fireplace Cleaning (firebox, smoke chamber, accessible flue) | $219 - $299 |
| Panel Replacement (Famco/Gelco/Olympia compatible, per panel) | $180 - $340 |
Factors that move the price: accessibility of the chimney chase, severity of creosote buildup, whether panels need replacement, and if the flue liner requires repair. We don’t estimate over the phone and then surprise you in person. A technician evaluates, documents with photos, and delivers a written price and scope. You approve it before we start. Haven Standard Clause 1: Have it in writing.
Call (720) 674-7312 for a free estimate. Estimates include the camera inspection and photo documentation.
We Also Serve Cities Near Centennial
Our crews work across the metro from Denver coordination, with regular routes through Centennial, Denver, Englewood, Greenwood Village, and Thornton. Scheduling is coordinated to minimize drive time and keep appointments predictable. If you’re in one of these neighboring cities, the same pricing, same Haven Standard clauses, and same documented photo record apply.
Serving Centennial, CO - Our Local Coverage Area
We’re based in the Centennial area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cleaning & Sweep in Centennial
Yes. Factory-built zero-clearance fireplaces have a rated service life of 20-30 years, so a 1980s unit is now 10-20 years past its design lifespan. In Centennial’s Willow Creek, Foxridge, and Piney Creek subdivisions, we regularly find spalling refractory panels and warped dampers on original units that still light fine. The camera reveals what visual inspection cannot. Call (720) 674-7312 for a free Level 2 estimate.
You probably can’t tell without a camera inspection. Third-degree glazed creosote is hard, shiny, and tar-like, and it forms especially in undersized flues with stop-start burning patterns - exactly what happens when Centennial homeowners idle through CDPHE Action Days and then burn low and slow on allowed days. A standard brush sweep won’t remove it. We diagnose with the camera and remove it mechanically or with chemical treatment, then show you the after photos. Call (720) 674-7312 if you haven’t had a camera inspection in the last year.
We stock and install Famco, Gelco, Olympia Chimney, DuraFlex, and HeatShield components through Haven’s buying network. For Centennial’s concentration of 1970s-1990s factory-built units, we commonly replace refractory panels with Famco-compatible parts, install DuraFlex liner sections, and apply HeatShield cerfractory foam for smoke chamber repair. The written scope specifies the exact manufacturer and part number before we start.
Centennial’s elevation and Chinook wind exposure. At 5,900-6,000 feet, sudden downslope warming events create rapid freeze-thaw cycles that stress metal and masonry caps far more than in lower suburbs like Englewood or Thornton. Prefab chimney caps on factory-built chases are particularly vulnerable - they’re thinner-gauge metal designed for milder climates. We install heavier-gauge replacements with proper counter-flashing to manage the thermal cycling. Camera inspection confirms whether water has already entered the chase and damaged the flue liner.
For most Centennial homes built before 1995, we recommend Level 2. The concentration of aging factory-built fireplaces here means internal camera documentation is essential to assess panel condition, damper integrity, and flue liner status. Level 1 is a visual inspection without camera deployment; it’s appropriate only for newer systems with recent clean history. We’ll explain which level suits your specific unit and why, then deliver the written price before we start. Call (720) 674-7312 to book.
Written by Corrine Halstead, Owner at Level Two Chimney Denver, serving Centennial and the metro area since 2009 under the Haven Standard.