Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Lakewood
Chimney repair in Lakewood typically runs $450-$2,800 depending on scope, and most jobs start with a Level 2 camera inspection that same week. At 5,440 feet on the Front Range, Lakewood’s postwar ranch chimneys face a unique combination of altitude-driven creosote buildup and violent Chinook temperature swings that crack mortar and spall brick far faster than flatland suburbs. Our crews serve Lakewood from our Denver office, and we’ve worked on chimneys from Green Mountain to the Estes-Alameda corridor since 2009. Call (720) 674-7312 to book a free estimate with written pricing before any work begins.
Why Level Two Chimney Denver Is Lakewood’s Preferred Chimney Repair Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been in Lakewood’s 1950-75 ranch neighborhoods where the same clay-tile flues and mortar joints keep showing us the same patterns of altitude and weather stress. Our Chimney Repair in Lakewood customers receive the same protocol every time: a camera down the flue, photos they can see, and a written price before anyone picks up a trowel.
Lakewood homeowners review us specifically on how we handle the “rebuild or repair” question. The 365-Day Done Right Promise means if our tuckpointing or waterproofing doesn’t hold through the next Chinook season, we make it right. Background-checked, uniformed technicians carry license information on every page and every truck. You’ll get a text when your tech is en route, and a live person answers the phone 24 hours a day - not a voicemail tree.
Our documented photo record on every visit, standard since 2009, became Clause 4 of the Haven Standard because we were tired of hearing homeowners say the last company “told them” something was cracked but never showed them. In Lakewood, where the housing stock is old enough to hide serious flue damage behind intact-looking brick, that documentation matters more than anywhere else in the metro.
Our Chimney Repair Services in Lakewood

Mortar Repointing & Tuckpointing
Tuckpointing in Lakewood runs $650-$1,400 for a typical ranch chimney, and it’s the repair we quote most often. The postwar brick in neighborhoods like Green Mountain and Estes-Alameda was laid with mortar formulas that weren’t designed for Front Range Chinook cycles - 40-50°F temperature swings in hours force water into joints, freeze it overnight, and blow out the bond. We grind out failed joints to proper depth, match the original mortar composition for thermal compatibility, and repoint by hand. Nothing gets ground out without camera confirmation that the flue behind it is sound. Clause 1 of the Haven Standard requires the written price and scope before work starts; Clause 4 requires the photo record after.

Spalling Brick Repair
Spalling brick repair in Lakewood typically costs $800-$2,200. The freeze-thaw stress near the foothills pops facing bricks off the wythe in clusters, especially on south- and west-facing exposures that catch the afternoon sun followed by rapid Chinook cooling. We remove spalled units, assess the inner wythe for moisture intrusion damage, and replace with matching brick when possible. If the spalling has compromised the structural shell, we show you the camera footage and explain exactly why - never with a hard sell for a full rebuild when targeted repair will last another decade.

Chimney Waterproofing
Chimney waterproofing in Lakewood runs $350-$750 and pays for itself fast. At this elevation, UV exposure is more intense than sea-level specs account for, and the waterproofing products sold at hardware stores aren’t rated for 5,440-foot solar degradation. We apply vapor-permeable sealers from our Haven buying network - materials sourced through Olympia Chimney and Famco - that let the masonry breathe while blocking liquid water. In Lakewood’s foothill zones, we pay special attention to the crown wash and the shoulder where the chimney meets the roofline, because that’s where Chinook-driven ice formation starts.

Flashing Repair
Flashing repair in Lakewood typically costs $400-$950. The step flashing and counterflashing on ranch homes from the 1960s and 70s was often installed with galvanized steel that rusts through in 15-20 years, or with aluminum that work-hardens and cracks under thermal cycling. Front Range wind events lift shingles, peel back flashing seals, and drive water directly into the chimney-roof interface. We replace with copper or stainless step flashing where appropriate, sealed with high-temp silicone rated for the temperature swings Lakewood chimneys see. Every repair includes photos of the before condition and the completed work.

Chimney Rebuilding
Full chimney rebuilding in Lakewood runs $3,500-$8,500 and represents maybe 5% of the “you need a rebuild” quotes we review for second opinions. We offer free second opinions on any written estimate from another company - bring us their scope and price, and we’ll run our camera to verify what they found. Rebuilds are only recommended when the camera shows multiple courses of compromised structural wythe, a flue liner that cannot be relined safely, or crown failure that has allowed sustained water intrusion into the core. Even then, we quote partial rebuilds when the damage is localized to the upper courses.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Lakewood
We source repair materials through Haven’s buying network to keep customer prices honest: DuraFlex stainless relining for clay-tile replacement, HeatShield cerfractory resurfacing for smoke chamber parging, Gelco and Olympia Chimney components for caps and dampers, and Famco hardware for flashing and ventilation details. For Lakewood’s older chimneys, we stock common clay flue tile sizes that match the 6-inch and 8-inch liners installed in the 1950-75 building boom - no waiting on special orders that delay your repair through another Chinook season.
Common Chimney Repair Problems We See in Lakewood Homes

- Clay-tile flues past rated service life. The 6-inch liners in Lakewood’s postwar ranches were rated for roughly 50 years under ideal conditions. At 5,440 feet with oxygen-starved fires producing more unburned hydrocarbons, that service life shortens. We find cracked tiles, shifted joints, and third-degree creosote glaze that a flashlight inspection misses entirely.
- 1970s-80s inserts in unlined or undersized flues. The energy-crisis wood-burning inserts dropped into Lakewood chimneys often vent into flues never designed for their output. The mismatch produces poor draft, accelerated creosote buildup, and moisture condensation that rots the chimney from the inside - misdiagnosed by less thorough inspectors as “bad wood” or “cold chimney syndrome.”
- Chinook-cracked crowns and popped flashing. A single January week in Lakewood can cycle a chimney crown through freeze, thaw, freeze, thaw four times. The concrete wash cracks, water enters, and by March the interior wythe is saturated. We see this pattern predictably on Green Mountain homes and throughout the Estes-Alameda corridor.
- Heatilator-style metal chases misidentified as masonry. In Green Mountain and the older Estes-Alameda corridor, many 1960s-70s ranch homes contain factory-built zero-clearance fireplaces that homeowners - and sometimes home inspectors - assume are brick masonry. These metal-chase systems require completely different cleaning tools, a different Level 2 inspection protocol, and have altitude-specific draft problems that standard masonry approaches will miss.
Pricing for Chimney Repair in Lakewood, CO
| Service | Typical Range in Lakewood |
|---|---|
| Level 2 Camera Inspection | $199-$289 (included with repair if booked) |
| Tuckpointing / Mortar Repointing | $650-$1,400 |
| Spalling Brick Repair (localized) | $800-$2,200 |
| Chimney Waterproofing | $350-$750 |
| Flashing Repair | $400-$950 |
| Crown Repair / Rebuild | $850-$1,800 |
| Partial Chimney Rebuild | $3,500-$5,500 |
| Full Chimney Rebuild | $5,500-$8,500 |
What moves a job to the higher end: multiple stories of scaffolding, extensive spalling requiring brick matching, hidden flue damage found during camera inspection, or the need for stainless relining before exterior repair can safely proceed. What keeps it lower: early intervention, localized damage caught before water intrusion spreads, and homeowners who schedule after the first visible crack rather than waiting for the ceiling stain. Every quote is delivered in writing with scope and warranty before work starts - Haven Standard Clause 1, no exceptions. Call (720) 674-7312 for your free estimate.
We Also Serve Cities Near Lakewood

Our Chimney Repair crews work throughout the metro, including Denver, Englewood, Greenwood Village, and Thornton. Scheduling and dispatch are coordinated from our Denver office, with Lakewood jobs routed for efficient response times to foothill neighborhoods.
Serving Lakewood, CO - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Lakewood

A Level 2 inspection covers the full interior flue by camera, the exterior masonry, crown, cap, flashing, smoke chamber, firebox, and damper operation - with special attention in Lakewood to altitude-specific draft performance and the metal-chase systems common in Green Mountain and Estes-Alameda ranches. You’ll receive a documented photo record of all findings, written scope, and written price before any repair is proposed. Call (720) 674-7312 to schedule - estimates are free.
Lakewood pricing runs roughly parallel to Denver and Englewood, with slight premiums for foothill-access jobs requiring longer setup or scaffolding. The bigger cost difference comes from catching damage early versus waiting. A $650 tuckpointing job in Lakewood becomes a $3,500 partial rebuild if water intrusion is ignored through two Chinook seasons. We quote in writing before work starts, and our free second opinion on any competitor’s written estimate lets you compare apples-to-apples.
The brick tells maybe 20% of the story. In Lakewood’s 50-to-70-year-old chimneys, we’ve found flue liners cracked top to bottom while the exterior looked almost pristine - and we’ve found exterior spalling that looked catastrophic while the interior flue was sound enough for relining rather than rebuild. The camera shows what actually needs fixing. Clause 4 of the Haven Standard requires that photo record on every job because we don’t believe homeowners should take anyone’s word for what’s inside their chimney.
NFPA 211 recommends annual inspection for all wood-burning systems, and in Lakewood’s conditions we agree strongly. The combination of altitude-driven creosote formation and Chinook thermal cycling means damage accelerates faster than the national standard assumes. Even gas systems should be inspected every two years for venting integrity. Our 38,000+ inspections since 2009 show that Lakewood chimneys inspected on schedule rarely need major repair; those skipped for 3-5 years often need extensive work.
Live phone support runs 24 hours a day, 7 days a week, and we prioritize calls involving active water intrusion, visible structural instability, or post-chimney-fire evaluation. For true emergencies - a leaning chimney, fallen bricks, or suspected carbon monoxide venting - we’ll schedule the fastest available inspection and temporary stabilization if needed. Most Lakewood repairs are booked within a week, with camera documentation and written pricing before any work proceeds.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Lakewood since 2009 under the Haven Standard.





Before
After
Before
After
Before
After